A toilet seat is likely to see a lot of wear, especially if there’s only one bathroom in your house. The paint can wear off over time, and it is easy to clean with harsh cleaning products. You won’t be able to live with a dirty toilet seat any longer once you know how to paint it.
- 1 Can You Paint A Toilet Seat?
- 2 Toilet Seat Paint: What paint should you paint your toilet seat?
- 3 What else do you need?
- 4 How to Paint a Toilet Seat
- 5 Replace a worn toilet seat
Can You Paint A Toilet Seat?
Yes. Both wooden and plastic toilet seats can be painted. Preparing the surface is key. Apply thin coats of paint to prevent paint dripping or chipping.
Padded toilet seats cannot be painted. These seats are not suitable for painting due to the vinyl fabric that covers them.
Toilet Seat Paint: What paint should you paint your toilet seat?
In order to bond the paint to the surface properly, you would normally need a primer and paint.
Rust-Oleum has developed spray paint with BOTH primers and paint in one. It’s like magic!
- Ideal for use on interior/exterior surfaces including wood, plastic, plaster, metal, masonry and unglazed ceramic
- Oil-based formula is low odor, resist chips and provides long-lasting protection
- Dries to touch in 20 minutes and covers up to 12 sq. ft. per can
- Durable formula provides excellent hide and goes on smoothly
- Gloss finish provides a fresh, new look for surfaces
They also come in a variety of colors. While painting your toilet seat Berry Pink might not be on your decorating list, it is a good idea to have it available for other projects that you may have been avoiding. It’s possible to paint your toilet seat Berry Pink, but it might not be in your decorating plans at the moment.
What else do you need?
It is a good idea to have all the supplies ready in advance. This will help make your project run smoothly. These items should always be on hand.
- Toilet Cleaner
- Spray primer, for wood or plastics
- Spray paint, for wood or plastics
- Drop Cloth – Newspaper can be used as a substitute
- Sandpaper (120 grit)
- Painters Tape
- Safety Equipment – Goggles, Masks
If the bathroom is unusually busy and requires almost daily cleaning, spray paint might not last as long as epoxy paint. Epoxy paint is available in two-part kits, and the components are mixed immediately before use. You can spray epoxy paint with a compressor-style paint our paint picks for wood toilet seats. Additionally, the option in the middle will serve as a primer and paint, saving you a little bit of time!
How to Paint a Toilet Seat
Take out the toilet seat
You can do this by unscrewing the bolts that hold it in place. You may be able to do this with your fingers, but if not, a pair of pliers or a wrench will help you get them off. This is a good opportunity to also consider if it’s time to get a new toilet seat.
This is done by removing the bolt covers from the back of your toilet seat. Next, use a large screwdriver and a wrench to turn the bolt. It sounds terrible, I know. way, it’s actually more difficult than it seems.
Make sure to clean the toilet seat
Front and back. Top and bottom. Do not forget to clean the hinges. Rinse thoroughly and allow it to dry completely
Do not paint areas that are too sensitive
You can use the painters’ tape for masking any areas that shouldn’t be painted, such as hinge covers and hinge covers. Newspaper can be used to make a bigger mask if you don’t wish the lid painted.
Sand areas to be painted
To prevent small particles of porcelain from entering your lungs, I recommend that you wear a mask on your face. It’s a great time to ensure that your work area is clean. Well ventilated. Open a window, turn on the fan, and leave the door open. You’ll be able to thank me later
Sanding creates a rougher surface that allows the paint to stick better. All areas to be painted should be lightly sanded until they appear dull and slightly roughened. Use a damp cloth to clean up any dust. Dry thoroughly.
It’s best to take it outside
To paint, you will need to have a well-ventilated area. You can use a drop cloth to ensure that the area under the painting is not painted. You don’t want a toilet seat-shaped paint ring in your driveway for all eternity.
Paint the toilet seat
Spray paint a thin, even coat of paint from 6-10 inches away. Spraying too close to the surface will cause paint drips and uneven coatings, follow the directions. Spray into every nook and crevice. Let dry the first coat and then apply the second coat. To ensure flawless results, please refer to the Rust-Oleum instructions.
Allow drying completely before reinstalling the toilet seat
After the new toilet seat has dried, you can re-install it onto the toilet.
Replace a worn toilet seat
Sometimes, a worn-out toilet seat is not worth painting or restoring. Replacing a toilet seat is very easy to do, plus a basic version doesn’t cost any more than the cost of a can of spray paint!
You can find the right toilet seat for you in our article “ Best toilet seat“.